Commercial Systems
The
thermic frames of fire rated panic doors are designed to decrease the
transmitted heat by reflecting it to the side walls. Galvanized steel surfaces
provides high protection from exterior factors and coated with epoxy powder to
provide aesthetic appearance. The panic bars provide easy evacutation in case
of fire danger.
The
gaskets which are fixed in the inner part of the door inflate in the case of
fire danger and provide gas isolation. The fire resistant core of the
door is tested and certified.
IDRA
Idra is a flexible
and secure solution that responds to the needs of homes, supermarkets,
hospitals, warehouses, machine rooms, cinemas, restaurants and any public
building. Ideal for the division of medium sized rooms typical of 1 and 2 leaf
doors. Idra is the most widely spread fire door due to its intrinsic
characteristics resulting from the correct balance of various factors.
Performance,
availability in standard and non-standard measurements, flush structure,
strength typical of steel, transparency with fireproof glazing options,
insulation qualities, wide range of colours and a cost being one of the lowest
in its category due to the reduced price difference between REI 60 and REI 120.
Available in the
panic-bar or handle/handle versions, with surface protective film to be removed
after fitting.
SPLIT
Door with fireproof
type approval following the UNI 9723 of MD 14/12/93, standard accessories and
technical characteristics as of our production. Galvanised steel frame with “Z”
profile on 4 sides with removable lower transom, painted with ties and bolt
holes, auto-expanding hot fume seal, 3 standard 3 leaf hinges adjustable in
height on painted steel ball, auto-closure with spiral spring incorporated in
the hinge. Light ivory epoxy-polyester powder painting similar to the RAL 9010.
Galvanised steel blank leaf painted or pre-painted in light ivory similar to
the RAL 9010 colour with protective film to be removed after fitting.
High-density insulation, mortise type lock with single cylindrical locking
point with fake PVC Yale cylinder and 1 standardised cut Patent key.
Accident-prevention door furniture (handle/handle) on opaque black resin
plaque, internal reinforcing for fitting of standard door-closer and panic-bar
and fitting of accessories even during the after-sales period. Installation on
brick walls in internal locations that are not exposed to the sun and/or rain.
Reversible right push or left push opening that can be decided on before
fitting, minimum supply of 10 pieces.
Leaf thickness 65
mm, leaf + frame thickness 70 mm.
Options: handle
and/or panic-bar, door closer, rectangular or circular glazing, kick plates,
choice of RAL paint for minimum supplies of 10 pieces, not available in
non-standard sizes.