Access-Control Systems
Rising to the challenge of vehicle access control
The J Series bollard represents a new
generation access control solution. Many design innovations make it easy to
handle and install but best of all its performance is market leading and
lifetime costs exceptionally competitive. Activated by any access control
system or signalling device, it is an alternative solution to fixed posts and
barriers, allowing regulation of traffic into certain zones with high vehicle
flow, (e.g. restricted areas, pedestrian areas, parking and industrial sites
and many more). Available with a diameter of 275mm, and a height of 600mm or
800mm.
J 275 Bollard guarantees free pedestrian flow, but manages vehicle
traffic or limited parking, with the following advantages:
• Does not disfigure the characteristics of
the environment because of its mobile concealed element with minimal
environmental impact
• Ensures greater protection of pedestrian
areas in the town centre
• Allows access to authorised vehicles only
• Reduces and optimises the use of human resources in access control
activities
• Customisable colour selection for blending
in with the urban context
• Activity can be signalled by built-in
buzzer and led outer ring, according to its position
• A full range of accessories is available
• Its function is to deter
The J Series has a number of exceptional features
The bollard was designed and tested in order
to optimise installation, servicing and maintenance activities whilst
maintaining maximum reliability over its lifetime.
1. new drive concept – the drive unit is
mounted in the moving cylinder
2. high resistance steel structure
3. fast moving cylinder
4. “fully optional” version including all
main accessories
5. Lowered maintenance costs, due to one man
servicing.
6. flexible control unit that manages up to 4
bollards
7. Possible replacement of first generation
fAAc city bollards
8. cylindrical shaped metal sheets make up
the foundation box, enabling easy handling
12 reasons to explain the uniqueness of J275 bollard
1. Mobile drive unit, extractable by a handle
for ease of replacement or maintenance
2. cylinder slides on double rail to provide
better stability in raising and lowering
3. no pipes with oil under pressure to avoid
risk of failure's risks
4. Built-in illuminated outer ring powered by
central led and acoustic buzzer
5. Built-in emergency release in case of
power failure
6. Built-in mechanical release to lower the
cylinder in any circumstances
7. cylinder available in stainless steel AISI
316
8. Internal fixing frames made of stainless
steel
9. connectors and junction boxes, with IP 67
certification
10. Round-section pit to optimize digging
works
11. Pit supplied in a kit to minimise
transport charges and packaging dimensions
12. JE 275 control board able to manage up to
four bollards
J 275: automatic
The J Series Automatic concealed traffic
bollard is advisable when many transits per day are expected.It can be
activated automatically by commands given by authorised persons (cards,
remote-controls, etc.) or by automatic commands operating at set times (hourly
programmer).The device has double effect hydraulic activation, with a drive
station.
J 275: semiautomatic
This type of concealed bollard should
preferably be used when accesses are limited, or are combined with the
automatic version.It solves transit and/or parking problems, at a reasonable
cost, without the need for electrical energy; in fact, thanks to the
single-effect gas actuator, lifting occurs automatically with a key, whereas
lowering is achieved by slight foot pressure on the head of the concealed
bollard.
FAAC City K: antiterrorism
FAAC CITY K 275 H700 automatic
It was specifically designed to meet
increasingly frequent security requirements.
Available only in the Automatic version, it
stands out for its extremely high anti break-in resistance. This traffic
bollard was specifically designed to meet increasingly frequent security
requirements. Its applications include creating protective barriers or allowing
access to particularly sensitive zones such as: Embassies, Consulates, Public
Offices, Banks, etc. Impact by a vehicle against the cylinder of the K 275 H700
concealed bollard can produce two types of deformation: elastic and
permanent.Elastic deformation: 16,000 Joule. FAAC CITY continues to operate and
the safety devices are guaranteed.Permanent deformation: 630,000 Joule (partial
or total breakage of the concealed traffic bollard).